Dry Ice Blasting Mold in TOLUCA LAKE, California
Waterless, chemical-free mold removal for homes and businesses
Dry Ice Blasting Mold in TOLUCA LAKE, California is the fastest way to strip mold off wood framing, brick, ductwork and machinery without soaking your property. We blast frozen CO2 pellets at supersonic speed, lift the growth, and vacuum it away the same day. If you have smelled that musty odor since the last rain, call (833) 929-5837 and we will inspect today.
What Dry Ice Blasting Mold in TOLUCA LAKE, California Does
Dry Ice Blasting Mold in TOLUCA LAKE, California uses compressed air to fire rice-sized dry ice pellets at roughly 1,500 feet per second. The pellets hit the mold, flash from solid to gas on contact, and lift the growth off the surface without abrasives, water or chemical residue. Because the CO2 simply disappears, there is nothing to wipe up and nothing left behind but the mold you vacuumed into a HEPA unit. It is the same technology food plants and printing presses use to clean without shutting down production.
Toluca Lake sits low near the Los Angeles River channel, so crawl spaces and ground-floor walls hold moisture longer than most of the San Fernando Valley. Add decades-old plumbing in the Forman Avenue District and the occasional roof leak after a wet winter, and you get black mold growth inside wall cavities where nobody sees it. We use a moisture meter and a thermal imaging camera to find the wet pocket first, then run dry ice mold remediation TOLUCA LAKE California homeowners call us for before the smell spreads.
Why Dry Ice Blasting Beats Wet Mold Removal
Dry ice blasting does in hours what scrubbing and sanding take days to do, and it does it without adding water to a building that already has a moisture problem.
No Secondary Water Damage
Every gallon of water you add during cleanup has to be dried out again. Dry ice blasting introduces zero moisture, so we are not feeding the same mold colony we are removing. On a typical 400-square-foot crawl space, that saves 24 to 48 hours of dehumidifier runtime and protects the subfloor from swelling.
Reaches Hidden Surfaces
We feed the blasting wand through a boroscope camera port into wall cavities, behind baseboards and above ceiling tiles. Wood joists, brick firewalls and HVAC plenum interiors come clean without demolition. That means you keep your original 1920s lath, your cabinetry and your tile instead of paying to rebuild them.
No Chemical Residue
Because dry ice sublimates, there is no slurry to contain and no antimicrobial film left on your framing. We still apply a Fiberlock or Concrobium antimicrobial coating afterward as a separate step, but only where you want it, not everywhere the blasting touched. Sensitive occupants and pets can return sooner.
Faster Turnaround
A single-room attic mold job in Toluca Lake Estates usually takes two to four hours of blasting plus setup and final HEPA vacuuming. Compare that to two or three days of hand-scrubbing and sanding. For commercial dry ice mold remediation TOLUCA LAKE restaurant and office clients, that difference often means reopening the next morning.
Our Dry Ice Blasting Mold Process
Every job follows the same five steps, from the first phone call to the final spore trap sample. You will know what is happening and why at each stage.
Inspection and Testing
We arrive with a moisture meter, thermal imaging camera and boroscope camera to map the mold and find the water source. Air and surface samples go to a lab, and you get results in 24 to 48 hours. This step usually takes 60 to 90 minutes for a single-family home.
Containment Setup
We seal the work zone with 6-mil plastic sheeting and duct tape, then install a negative air machine with HEPA filters so spores cannot drift into clean rooms. Technicians suit up in respirators and full personal protective equipment. Setup takes 45 to 90 minutes depending on how many rooms are involved.
Dry Ice Blasting
Using a dry ice blasting machine, we strip mold from framing, sheathing, ductwork and equipment. Pellets hit at roughly -109 degrees Fahrenheit and lift growth without gouging the wood. A typical attic or crawl space runs two to four hours of active blasting.
HEPA Vacuum and Treatment
Every blasted surface gets a HEPA vacuum pass, then an antimicrobial coating such as Fiberlock or Concrobium where appropriate. For heavy odors we follow with a fogging machine using Benefect. This stage adds one to two hours.
Clearance Testing
We run a spore trap sampler and compare indoor counts to an outdoor baseline. If levels are not back to normal, we re-clean at no extra charge. You receive a written clearance report you can hand to a landlord, insurer or buyer.
Trained for Cryogenic Mold Removal in Toluca Lake
Our technicians hold IICRC Mold Remediation Certification and follow the IICRC S520 standard for mold remediation, which is the benchmark California insurers and property managers expect. We also carry EPA Lead-Safe Certification because many Toluca Lake homes were built before 1978 and contain lead paint under the mold. An ACAC Certified Mold Inspector on staff reviews every scope before work begins, and our crew is trained under OSHA Hazard Communication rules for handling dry ice and antimicrobial chemicals safely.
- IICRC Mold Remediation Certification held by every lead technician on the crew.
- EPA Lead-Safe Certification for pre-1978 homes common around Toluca Lake Village.
- ACAC Certified Mold Inspector reviews each scope before blasting starts.
- OSHA Hazard Communication training for dry ice handling and chemical use.
- California Contractors State License Board (CSLB) licensed and insured.
- Indoor Air Quality Association (IAQA) member with ongoing moisture-science training.
Why Toluca Lake Calls Us for Dry Ice Blasting Mold
We are a local mold crew, not a franchise call center. When you call (833) 929-5837, you reach a technician who has crawled under Toluca Lake houses and knows what our humidity does to a subfloor.
Same-Day Emergency Response
We answer 24/7 and can be on site within 60 to 90 minutes for active water damage in North Toluca Lake and the Cahuenga Boulevard Corridor. Fast containment stops mold from spreading past the original wet zone, which is the single biggest factor in final cost.
Lab-Backed Clearance
We do not call a job done because it looks clean. Every project ends with spore trap sampling compared against an outdoor baseline. If the numbers are still high, we re-clean. You get a written report, which matters when you sell or refinance a Toluca Lake property.
Dry Ice Blasting Specialists
Not every mold company owns a dry ice blasting machine. We do, and we run it weekly on crawl space mold, attic mold and HVAC mold contamination jobs. That focus is why affordable dry ice blasting mold TOLUCA LAKE California pricing is possible without cutting corners on containment.
Upfront Flat Pricing
You get one number before we start, based on square footage, access difficulty and how much material has to be removed. No hourly surprises, no change orders for the containment we already quoted. Financing is available on jobs over $2,500.
What Our Dry Ice Blasting Mold Service Includes
Every dry ice blasting mold job includes the full remediation sequence, not just the blasting. We handle containment, removal, treatment and clearance testing so you are not left coordinating three different contractors.
What's Included
Moisture Mapping and Inspection
We use a moisture meter, thermal imaging camera and boroscope camera to find every wet pocket and hidden mold colony before we quote. You see the readings and photos.
Full Containment and HEPA Filtration
Plastic sheeting, duct tape and a negative air machine with HEPA filters keep spores inside the work zone. We also run an air scrubber for the duration of the job.
Dry Ice Blasting of Affected Surfaces
Framing, sheathing, brick, concrete, ductwork and equipment get blasted clean. Pellets hit at roughly -109 degrees Fahrenheit and lift mold without gouging the substrate.
HEPA Vacuum and Antimicrobial Coating
After blasting, every surface gets a HEPA vacuum pass and an antimicrobial coating such as Fiberlock or Concrobium where appropriate. We use Benefect fogging for stubborn odors.
Debris Removal and Disposal
Contaminated drywall, insulation and plastic sheeting are bagged and hauled away. We leave the space broom-clean, not piled with debris for you to deal with.
Post-Remediation Clearance Testing
Spore trap sampling before and after gives you a number, not an opinion. If counts are still elevated, we re-clean at no extra charge until the report is clean.
Mold Problems We Solve with Dry Ice Blasting
Most Toluca Lake mold calls come down to one of four problems. Dry ice blasting solves all of them without tearing your home apart or adding more water to the mess.
Crawl space mold on floor joists and subfloor
Wood rot weakens the structure, and spores drift up through the floor into living areas, triggering allergies and musty odors year round.
We contain the crawl space, blast the joists and subfloor clean, then apply an antimicrobial coating. A dehumidifier keeps humidity under 50 percent so the mold does not return.
Attic mold from bath fans venting into the roof space
Warm moist air condenses on cold sheathing every winter, feeding black mold growth across the roof deck and rafters.
We reroute the fan ducting, blast the sheathing and rafters, and add ventilation. Clearance testing confirms spore counts are back to outdoor baseline levels.
HVAC mold contamination spreading through the house
Every time the system runs, it pushes mold spores into bedrooms, kitchens and living rooms, so cleaning one room never fixes the problem.
We isolate the plenum and duct runs, blast the interior surfaces, HEPA vacuum the system, and treat with an antimicrobial coating before restarting airflow.
Bathroom mold behind tile from a slow supply-line leak
The leak keeps the wall cavity wet, so mold keeps returning no matter how many times you scrub the tile with bleach.
We locate the leak, open a small access panel, blast the framing and sheathing, then rebuild only the section that has to come out. The leak gets fixed before we close the wall.
When Toluca Lake Properties Need Dry Ice Blasting
A 1920s bungalow near Toluca Lake Estates has musty air in the front bedroom after every rain.
We inspect the wall cavity with a boroscope camera, find mold on the original lath and framing, and blast it clean through a small access port. No full wall demolition needed.
The bedroom smells neutral within 24 hours, and the original plaster wall stays intact. Clearance testing confirms normal spore levels.
A restaurant on the Cahuenga Boulevard Corridor finds mold behind its walk-in cooler after a drain backup.
We work overnight, contain the area, blast the wall framing and floor, and fog with Benefect. The kitchen is sealed off from the work zone the entire time.
The restaurant opens on schedule the next morning with a written clearance report ready for the health inspector.
A property manager in the Riverside Drive Corridor has mold in the HVAC plenum of a six-unit building.
We isolate the duct runs, blast the plenum interior, HEPA vacuum the system, and apply an antimicrobial coating. Each unit gets its own air quality test afterward.
All six units pass clearance, and the building avoids a full duct replacement that would have cost tens of thousands.
A homeowner in North Toluca Lake finds black mold on crawl space joists after a slow supply-line leak.
We fix the leak, contain the crawl space, blast the joists and subfloor, and install a dehumidifier to keep humidity under 50 percent going forward.
Structural wood is saved, the musty smell is gone, and the home passes a pre-sale mold inspection two months later.
Tools and Methods We Use
Tools & Equipment
Dry Ice Blasting Machine
Fires rice-sized CO2 pellets at roughly 1,500 feet per second to lift mold off framing, brick, concrete and ductwork without abrasives or water.
Thermal Imaging Camera
Reveals temperature differences behind walls that point to hidden moisture pockets and active mold growth before we open anything up.
Boroscope Camera
Lets us see inside wall cavities, plenums and crawl spaces through a small access hole, so we blast only what actually needs it.
Negative Air Machine with HEPA Filters
Keeps the work zone under negative pressure so spores cannot escape into clean rooms during blasting and vacuuming.
HEPA Vacuum
Captures blasted mold debris and loose spores at 99.97 percent efficiency at 0.3 microns, the standard for IICRC S520 remediation.
Fogging Machine
Applies Benefect or ShockWave as a fine mist to reach cracks and voids that a blasting wand cannot touch.
Dehumidifier and Air Scrubber
Dri-Eaz and Phoenix Restoration units pull moisture out of the air and keep it out, so mold does not return after remediation.
Methods
IICRC S520 Mold Remediation Standard
The industry benchmark for containment, removal and clearance. We follow it on every job, from a single bathroom to a full commercial building, and document each step in your file.
Spore Trap Sampling
We collect air samples indoors and outdoors before and after blasting, then compare counts. This is how we prove the job actually worked instead of just looking clean.
Antimicrobial Coating Application
After blasting and HEPA vacuuming, we apply Fiberlock or Concrobium to the cleaned surfaces. The coating prevents regrowth on wood and masonry where moisture may return.
Moisture Source Correction
Blasting without fixing the leak is wasted money. We identify and correct the water source, whether it is a supply line, roof flashing or bath fan ducting, before we close up.
How Dry Ice Blasting Mold Runs in Toluca Lake
Toluca Lake sits in a low pocket of the San Fernando Valley, close enough to the Los Angeles River channel that ground-floor walls and crawl spaces hold moisture longer than most surrounding neighborhoods. The housing stock is a mix of 1920s bungalows, mid-century remodels and newer construction around Toluca Lake Estates, and each one fails differently. Older homes have original lath, plaster and galvanized plumbing that leaks slowly behind walls. Newer homes have tighter envelopes that trap humidity from showers and cooking. Both scenarios feed black mold growth in places you cannot see. We run cryogenic mold removal TOLUCA LAKE California crews with moisture meters and thermal imaging cameras first, because blasting the wrong surface wastes your money. If you need dry ice mold remediation in TOLUCA LAKE California after a winter roof leak or a summer AC condensate overflow, we can usually be on site the same day.
Service Areas
Older bungalows with original plumbing and plaster walls. Slow supply-line leaks behind kitchen and bathroom walls are the most common mold source we find here.
Mixed residential and commercial buildings. We handle overnight dry ice blasting for restaurants and offices so business is not interrupted.
Tree-lined streets with mature root systems that crack older clay sewer lines, which then seep into crawl spaces and feed mold growth.
Larger homes with multi-zone HVAC systems. When one zone gets mold contamination, it spreads through the whole house if not contained quickly.
Close to the Lankershim Boulevard Corridor, where traffic vibration and older construction combine to open small cracks around windows and doors.
Local Considerations
Winter rain and roof leaks
From November through March, roof flashing and skylight seals fail, sending water into attic sheathing where mold can start within 48 hours.
Year-round high indoor humidity
Showers, cooking and laundry push indoor humidity above 60 percent in tightly sealed homes, which is enough for mold to grow on cold surfaces.
Aging galvanized and clay plumbing
Slow pinhole leaks behind walls and under slabs keep framing damp for months before anyone notices, giving mold a long head start.
Low crawl space clearance
Many Toluca Lake crawl spaces are under 24 inches tall, which makes hand-scrubbing impractical and dry ice blasting the only realistic option.
Crawl Space Joists After Supply-Line Leak
A North Toluca Lake homeowner found black mold across roughly 300 square feet of floor joists and subfloor after a slow supply-line leak went unnoticed for months. Humidity in the crawl space was reading 72 percent.
We fixed the leak, contained the space, blasted the joists and subfloor in about three hours, and applied an antimicrobial coating. Post-remediation spore counts dropped to outdoor baseline levels, and humidity now holds at 45 percent.
Maintenance & Follow-up
Run the crawl space dehumidifier continuously and check it monthly. We recommend a moisture meter reading every six months, especially after heavy winter rain.
An attic in Toluca Lake Estates had mold spreading across roughly 200 square feet of roof sheathing because a bath fan was venting directly into the attic. The musty smell was noticeable in the upstairs hallway.
We rerouted the fan ducting through the roof, blasted the sheathing and rafters clean, and added ridge ventilation. Clearance testing came back clean, and the hallway odor cleared within 24 hours.
Maintenance & Follow-up
Check the bath fan duct connection each fall and confirm it exhausts outside. Keep attic vents clear of insulation and stored boxes.
A Cahuenga Boulevard Corridor restaurant found mold on the wall framing behind its walk-in cooler after a drain backup. The kitchen could not operate until the area passed inspection.
We worked overnight, contained the area, blasted the framing and floor, and fogged with Benefect. The health inspector signed off on the clearance report the next morning, and the restaurant opened on schedule.
Maintenance & Follow-up
Keep the floor drain clear and check the cooler seal quarterly. We schedule an annual inspection to catch moisture before it becomes a mold problem again.
Dry Ice Blasting Mold Pricing in Toluca Lake
Typical 2026 pricing for dry ice blasting mold in Toluca Lake runs $1,800 to $6,500 for residential jobs, with most single-room crawl space or attic projects landing near $2,400. Commercial dry ice mold remediation TOLUCA LAKE projects are quoted per square foot after a walkthrough. You get a flat price before we start, based on square footage, access difficulty and how much material has to be removed. No hourly billing, no change orders for containment we already quoted.
Pricing Factors
Square footage affected
The single biggest cost driver. A 100-square-foot crawl space takes far less blasting time and dry ice than a 600-square-foot attic with mold across every rafter.
Access difficulty
Crawl spaces under 24 inches tall, tight attic spaces and sealed wall cavities take longer to contain and blast. We may need to cut a small access panel, which adds labor.
Material removal required
Porous materials like drywall and insulation usually have to be removed and replaced. Non-porous surfaces like framing, brick and concrete can be blasted and saved.
Containment size
Multi-room jobs need more plastic sheeting, more negative air machines and longer setup. A whole-house HVAC contamination job costs more than a single bathroom.
Clearance testing scope
Standard jobs include two spore trap samples. Larger commercial spaces may need ten or more samples, which adds lab fees but gives you stronger documentation.
Emergency timing
After-hours and weekend calls carry a higher rate. If the job can wait until a weekday, you will usually pay less for the same work.
Investment Range
$1,800 - $6,500 for most residential jobs; commercial quoted per square foot
Based on project scope
Value You Get
You are paying for containment, certified labor, dry ice, HEPA filtration, antimicrobial treatment, debris disposal and lab-backed clearance testing. The alternative, tearing out and rebuilding moldy framing and ductwork, typically costs three to five times more.
How much does dry ice blasting mold removal cost in TOLUCA LAKE California?
Most residential jobs run $1,800 to $6,500 in 2026, with a typical single-room attic or crawl space landing near $2,400. Price depends on square footage, how much drywall or insulation must be removed, and whether the mold reached structural framing. Commercial dry ice mold remediation TOLUCA LAKE projects are quoted per square foot after a walkthrough.
Is dry ice blasting safe for mold in TOLUCA LAKE?
Yes. Dry ice blasting is safe for wood, brick, concrete, metal and most plastics, and it adds no water or chemical residue. The pellets are food-grade CO2 that sublimates on contact. We still seal the work area and run negative air machines with HEPA filters so spores never reach the rest of your home. Occupants stay out during blasting and return the same day.
What are the benefits of dry ice mold remediation in TOLUCA LAKE California?
The main benefits are no secondary water damage, no chemical residue, and much faster turnaround. A job that would take two or three days of scrubbing and sanding finishes in four to six hours. It also reaches surfaces you cannot scrub by hand, like the inside of an HVAC plenum or the back side of lath behind a plaster wall.
Who offers dry ice blasting mold removal near me in TOLUCA LAKE?
We do. Our crew covers Toluca Lake Village, the Riverside Drive Corridor, Toluca Lake Estates, East Toluca Lake and the Lankershim Boulevard Corridor, and we run 24/7 for emergencies. Call (833) 929-5837 and we will schedule an inspection, usually the same day, and give you a written scope before any work begins.
Licensed, Certified, and Accountable
Certifications
Reviews
They blasted mold off our crawl space joists in one afternoon. The containment was tight, the crew explained every step, and the clearance report came back clean. Fair price for the amount of work involved.
We had mold in the attic from a bath fan venting into the roof space. They fixed the ducting, blasted the sheathing, and the musty smell was gone the next day. No upsell, no drama.
Overnight dry ice blasting saved our restaurant from closing for a week. Flat price, professional crew, and the health inspector accepted their clearance report without any follow-up questions.
Called at 8am about mold behind our bathroom tile, had a technician on site by 10am. They found the leak, blasted the framing, and rebuilt the wall in two days. Honest pricing and clear communication throughout.
Related Services
Mold Inspection Near Me
Before any blasting, we inspect the property with moisture meters and thermal imaging to confirm where mold is growing and why. Toluca Lake homeowners get a written report with photos and a recommended scope.
Mold Inspection Near MeMold Inspection
A full inspection covers attic, crawl space, bathrooms and HVAC. We map moisture readings room by room so the dry ice blasting crew knows exactly which surfaces to treat and which to leave alone.
Mold InspectionMold Testing
Surface and air samples go to an accredited lab, with results in 24 to 48 hours. Testing tells us whether you have black mold growth or a less aggressive species, which shapes the remediation plan.
Mold TestingMold Testing Near Me
Same-day testing is available across Toluca Lake. We collect spore trap samples before and after dry ice blasting so you can see the actual reduction in airborne counts.
Mold Testing Near MeCertified Mold Inspector
Our ACAC Certified Mold Inspector reviews every scope and signs off on clearance. That independent eye keeps the dry ice blasting job honest and gives you documentation for insurers or buyers.
Certified Mold InspectorBlack Mold Inspection
Black mold growth in a Toluca Lake crawl space or behind bathroom tile needs confirmation, not guesswork. We inspect, test and then blast the affected framing clean.
Black Mold InspectionHome Mold Inspection
A whole-home inspection catches the small leaks that feed mold long before you smell it. We check the roof, plumbing walls, crawl space and attic in one visit.
Home Mold InspectionResidential Mold Testing
Residential testing pairs with dry ice blasting for a complete fix. We test, blast, then re-test to confirm the home is back to normal spore levels.
Residential Mold TestingCommercial Mold Inspection
Restaurants, offices and retail spaces along the Cahuenga Boulevard Corridor need fast, quiet remediation. We inspect after hours and schedule blasting around your operating hours.
Commercial Mold InspectionMold Remediation Company
As a full remediation company, we handle containment, removal, treatment and clearance. Dry ice blasting is one tool in that kit, used where it outperforms wet methods.
Mold Remediation CompanyEmergency Mold Testing Services
When a pipe bursts or a roof leaks, mold can start within 24 to 48 hours. Our emergency testing gets you answers the same day so remediation can begin immediately.
Emergency Mold Testing ServicesSame Day Mold Testing
Call before noon and we can usually sample the same afternoon. Same-day testing shortens the gap between discovery and dry ice blasting, which limits how far mold spreads.
Same Day Mold TestingBasement Mold Inspection
Toluca Lake basements and below-grade rooms hold humidity year round. We inspect the walls, floor joists and any storage areas, then blast the affected surfaces clean.
Basement Mold InspectionAttic Mold Testing And Removal
Attic mold often traces to a bath fan venting into the wrong space. We test, fix the ventilation issue, then dry ice blast the roof sheathing and rafters.
Attic Mold Testing And RemovalAir Quality And Mold Testing
Air quality testing measures spores, VOCs and humidity. We use it before and after dry ice blasting to prove the air in your home is actually cleaner.
Air Quality And Mold TestingMold Remediation Near Me
Local crews matter when mold is spreading. We are based in Toluca Lake and can be on site within 60 to 90 minutes for emergencies in most neighborhoods.
Mold Remediation Near MeCrawl Space Mold Removal
Crawl space mold is our most common dry ice blasting job. The low clearance and exposed framing make blasting far easier than hand-scrubbing every joist.
Crawl Space Mold RemovalBathroom Mold Removal Service
Bathroom mold behind tile and under vanities often hides a slow leak. We find the source, blast the framing, and rebuild only what has to come out.
Bathroom Mold Removal ServiceToxic Mold Removal
Toxic mold exposure causes headaches, coughing and sinus problems. We contain the area, blast the growth, and verify with clearance testing before you return.
Toxic Mold RemovalMold Abatement
Mold abatement is the regulated removal of mold from a structure. Dry ice blasting fits inside that scope as a low-moisture, low-residue removal method.
Mold AbatementProfessional Mold Removal
Professional removal means containment, HEPA filtration, proper PPE and clearance testing. We follow IICRC S520 on every job, from a single bathroom to a full building.
Professional Mold RemovalMold Cleanup Near Me
Cleanup covers removal, disposal and surface treatment. We haul away contaminated drywall and insulation, then blast and coat what stays.
Mold Cleanup Near MeWater Damage Mold Remediation
Water damage and mold go together. We dry the structure first, then blast any mold that already took hold on framing or sheathing.
Water Damage Mold RemediationMold Spore Testing
Spore trap sampling gives a before-and-after number. It is the clearest proof that dry ice blasting actually reduced airborne mold in your Toluca Lake home.
Mold Spore TestingPost Remediation Mold Testing
Post-remediation testing is the final step. If counts are still elevated, we re-clean at no charge until the report comes back clean.
Post Remediation Mold TestingMold Fogging Treatment
Fogging reaches the cracks and voids a blasting wand cannot. We use Benefect or ShockWave after dry ice blasting to knock down residual spores in hard-to-reach areas.
Mold Fogging TreatmentAffordable Mold Remediation
Affordable does not mean cutting containment. We quote a flat price upfront and focus the dry ice blasting on the surfaces that actually need it, which keeps cost down.
Affordable Mold Remediation24 Hour Mold Removal
Mold does not wait for business hours. Our 24/7 line handles emergency calls across Toluca Lake, with containment started the same night when needed.
24 Hour Mold RemovalOdor Removal Mold
That musty smell is a symptom, not the problem. Once dry ice blasting removes the mold itself, the odor usually clears within 24 to 48 hours.
Odor Removal MoldBook Dry Ice Blasting Mold in TOLUCA LAKE, California Today
Mold doubles in coverage roughly every 48 hours when moisture is still present. Call (833) 929-5837 now and we will schedule an inspection, usually the same day, with a written scope and flat price before any work starts. IICRC-certified, CSLB-licensed, and answering 24/7.